Rich electric Invertek CombiPlus, Руководство пользователя

Страница: 18 / 128

Rich Electric Co. “CombiPlus” User Manual V7.19 Copyright 2009
Page 18
1.2 Location
This product must be installed in a dry and well-ventilated area, as close as possible to batteries.
There should be a clear space of at least 20 cm around the appliance for cooling.
Excessively high ambient temperature will result in the following
z
Reduced service life
z
Reduced charge current
z
Reduced peak capacity or shutdown of the inverter
Never position the inverter directly above the batteries.
CombiPlus is suitable for wall mounting. The back and the bottom of the enclosure
Has holes for wall mounting purposes.
The front of CombiPlus must remain accessible after installation. Ensure the AC and DC input cables
are fitted with fuses and circuit breakers. Try and keep the distance between the product and battery
to a minimum in order to minimize cable voltage losses.
The system should always be earthed for lightning and to reduce the risk of accidental short circuits,
Earthing the DC Power Wiring is not normally required. If the system is installed in a lightning
prone area then protection for the earthing of the DC wiring may be needed.
DC Earth cables must be capable of caring the battery fault current and trip the battery fuse before
the cabling fails.
A Battery Fuse or Circuit Breaker is required at all times; Never connect the CombiPlus directly to
the battery. The fuse or Circuit breaker should be connected as close to the battery as possible.
If the batteries are not earthed then protection should be provide on both the Positive and Negative
sides of the battery.
NOTE: The DC cabling should always be kept separated from any of the AC cabling.