Rich electric Invertek CombiPlus, Руководство пользователя

Страница: 24 / 128

Rich Electric Co. “CombiPlus” User Manual V7.19 Copyright 2009
Page 24
1.8 Second Battery
The “CombiPlus” has a secondary output connection for charging a starter battery.
For connection, see page 28
1.9 Voltage Sense
If you have long battery cable runs we recommend you use the voltage sense input. By
connecting wires of at least 0.75 mm
2
from the battery to the VS input the CombiPlus can
monitor the correct battery voltage. For connection, see page 28.
1.10 Battery Temperature Sensor (BTS-3)
The battery temperature sensor (optional) is recommended for correct temperature
compensated battery charging and battery over temperature protection, see page 28.
The sensor is insulated and must be mounted on the batteries minus pole.
1.11 Three Sets of Auxiliary Relay (RY1, RY2, RY3) Output
The “CombiPlus” provides 3 sets of Auxiliary Relays for users to connect to other
appliances or to output the alarm signals. 3 sets of relays can be programmed for respective
function.
(E Group Constants) and can be practically applied which is one of the greatest features.
1.12 Parallel Connection
The CombiPlus can be connected in parallel using multiple identical units, please see page
32. The batteries must be connected in accordance with page 30 & 31.This requires a
CP-PX, parallel box, to be purchased separately.
Note:
•
We recommended No more than 5 units should be connected in parallel.
•
Use the same model CombiPlus when connecting in parallel.
•
Make sure you have enough battery capacity to support the number of CombiPlus
Units.
•
Install the CombiPlus units next to each other making sure there is adequate clearance
for ventilation of at least 20 cm. For better ventilation, please install the fan cover
(optional).
•
The Battery Temperature Sensor (BTS), voltage sensor (V-SENS) and remote control
panel (RCP) must be connected to Master.
•
The cables for each CombiPlus must be equal in length (AC and DC)