Rice Lake MSI-4260 IS, Техническое руководство

Страница: 14 / 34

MSI-4260 IS Port-A-Weigh
10 Visit our website www.RiceLake.com
4.0 Setup
The following keys can be used when navigating through the menus while setting up the MSI-4260 IS.
• Press to exit setup without saving changes;

displays momentarily and unit enters Weigh mode
• Press while the digit is blinking to enter a decimal point
• Press to save and go back one level; Press again to leave the Setup mode,

displays briefly when
entering Weigh mode
• Press to step back one digit and press to change the digit if a wrong value is entered
• Press to enter or select a parameter
• Press to scroll through the parameters
4.1 Setup Menu
To enter into the MSI-4260 IS Setup menu, press and simultaneously.
Parameters Choices Description
 
Function User Key 1 – User definable key that can be programmed to one of several functions
Function User Key 2 – Not Available

Test Display – Section 4.1.2 on page 11

Total – Section 4.1.3 on page 11

View Total – Section 4.1.4 on page 12

Net/Gross – Section 4.1.5 on page 12

Peak Hold – See Section 4.1.6 on page 12 ; Function not available or non-functional in OIML R76 or NTEP HB44 modes

Units – See Section 4.1.7 on page 12 ; Function not available or non-functional in OIML R76 & 1Unit modes

High Resolution – x10 display resolution; All annunciators blink; For testing and maintenance use only; Function not
available in OIML R76 or NTEP HB44 modes; Does not increase scale resolution or accuracy – Section 4.1.8 on page 12

Print – Section 4.1.9 on page 12
 




Auto Off Time – Prolongs battery life of scale by turning power off after the set time (in minutes) that the scale is not in
use ( Section 4.2 on page 13 )
 



Sleep – Time (in minutes) before unit enters the sleep mode ( Section 4.3 on page 13 )
 




LED Display Intensity – Used to set the display brightness ( Section 4.4 on page 14 )
 


Setpoints 1-3 – Used for warnings or process control ( Section 4.5 on page 15 )
 




Total Mode – Accumulation of multiple weighments ( Section 4.6 on page 16 )




Weight Filter – Allows the scale to adjust to situations where there may be movement ( Section 4.7 on page 17 )
 

Weight Units – Toggle units between pounds and kilograms;
Function not available or non-functional in OIML R76 & 1Unit modes ( Section 4.8 on page 17 )
 

Battery Life – Sets the options for standard or extended battery life ( Section 4.9 on page 17 )
Table 4-1. Setup Menu Parameter Descriptions
es
POWER
es
POWER
st
ZERO
st
ZERO
TARE
T
TARE
T
USER
F
es
POWER
USER
F