Setup
© Rice Lake Weighing Systems
●
All Rights Reserved
13
4.2 Auto-Off
The Auto-Off feature prolongs the battery life by powering off the unit when not in use. Whenever a button is pressed or the
detected load is in motion exceeding 10d, the time limit is reset. When disabled, the unit will remain on and only turn off when
the power key is pressed or the battery dies.
Use the following steps to set the Auto-Off function:
1. Press and hold
and
.
displays.
2. Press the
to scroll to
.
3. Press
. The current
time displays.
4. Press the
to scroll through the available times.
5. Press
when the desired time displays.
displays.
6. Press
to exit setup and store the settings.
Press
at any time to cancel the procedure.
4.3 Sleep
The Sleep parameter reduces power consumption by automatically turning off the display during periods of inactivity. While in
the sleep mode, the green acknowledge annunciator blinks at a one second rate to indicate the unit is in sleep mode. To wake
up the unit, either a button must be pushed (front panel) or the weight must change by 5 d or more.
Sleep must be set to less time than the Auto-Off timer.
1. Press and hold
and
.
displays.
2. Press the
to scroll to the
function.
3. Press
. The current
time displays.
4. Press the
to scroll through the available times.
5. Press
when the desired time displays.
displays.
6. Press
to exit setup and store the settings.
Press
at any time to cancel the procedure.
USER
F
es
POWER
USER
F
TARE
T
USER
F
TARE
T
st
ZERO
Note
es
POWER
Note
USER
F
es
POWER
USER
F
TARE
T
USER
F
TARE
T
st
ZERO
Note
es
POWER
