Rice Lake iRev 920i, Руководство по установке, Страница: 7 / 101

Introduction 3
1.2 Indicator Operations
Basic
920i
operations are summarized below:
Toggle Gross/Net Mode
Press the
GROSS/NET
key to switch the display mode
from gross to net, or from net to gross. If a tare value
has been entered or acquired, the net value is the gross
weight minus the tare. If no tare has been entered or
acquired, the display remains in gross mode.
Gross mode is indicated by the word
Gross
(or
Brutto
in OIML mode); net mode is indicated by the
word
Net
.
Toggle Units
Press the
UNITS
key to switch between primary,
secondary, and tertiary units.
Zero Scale
1. In gross mode, remove all weight from the
scale and wait for the standstill annunciator
(
).
2. Press the
ZERO
key. The center of zero
( ) annunciator lights to indicate the
scale is zeroed.
Acquire Tare
1. Place container on scale and wait for the
standstill annunciator ( ).
2. Press the
TARE
key to acquire the tare weight
of the container.
3. Display shifts to net weight and shows the
word Net on the display.
Remove Stored Tare Value
1. Remove all weight from the scale and wait for
the standstill annunciator ( ).
2. Press the TARE key (or, in OIML mode, the
ZERO
key). Display shifts to gross weight and
shows the word Gross .
Print Ticket
1. Wait for the standstill annunciator ( ).
2. Press the
PRINT
key to send data to the serial
port.
1.3 Softkey Operations
Softkeys can be deÞned to provide operator additional
functions for speciÞc applications. Softkey assignments
are listed on the tabs shown at the bottom of the LCD
display; softkey functions are activated by pressing the
arrow keys below the softkey tabs (Figure 1-1 on page
2).
The particular set of softkeys shown on the display is
determined by the indicator conÞguration and
program.
Softkey Description
Time/Date Displays current time and date; allows
time and date change.
Display Tare Displays tare value for the current scale
Display
Accum Displays accumulator value, if enabled, for
the current scale.
Display ROC Displays rate-of-change value, if enabled,
for the current scale.
Setpoint Displays a menu of configured setpoints;
allows display and change of some
setpoint parameters.
Batch Start Starts a configured batch.
Batch Stop Stops a running batch and turns of all
associated digital outputs.
Batch Pause Pauses a running batch. (Same as stop,
but digital outputs, if on, are not turned
off.)
Batch Reset Stops a batch and resets it to the first
batch step.
Weigh In Allows truck ID entry; generates weigh-in
ticket for truck weighing applications.
Weigh Out Allows truck ID entry; generates weigh-out
ticket for truck weighing applications.
Truck Regs Displays truck register; allows deletion of
individual or all entries. Truck register can
be printed by pressing the
PRINT key
while the truck register is displayed.
Unit ID Allows display or change of Unit ID.
Select Scale For multi-scale applications, provides a
prompt to enter the scale number to be
displayed.
F1–F10 User-programmable keys; defined by
application.
More… For applications with more than five
defined softkeys, the
More… key is
automatically assigned to the fifth softkey
position. Press
More… to toggle between
groups of softkeys.
Table 1-1. ConÞgurable Softkeys