Rice Lake IQ plus 350, Руководство по установке

Страница: 7 / 48

Introduction 3
1.4 Indicator Operations
Basic IQ plus 350 operations are summarized below:
1.4.1 Toggle Gross/Net Mode
Press the GROSS/NET key to switch the display mode
from gross to net, or from net to gross. If a tare value
has been entered or acquired, the net value is the gross
weight minus the tare.
Gross mode is shown by the G (or B ) annunciator; net
mode is shown by the NET annunciator.
1.4.2 Toggle Units
Press the UNITS key to switch between primary and
secondary units. The units identifier is shown in the
lower right corner of the LCD display.
1.4.3 Zero Scale
1. In gross mode, remove all weight from the
scale and wait for the standstill annunciator
(
).
2. Press the ZERO key. The center of zero
( ) annunciator lights to indicate the
scale is zeroed.
1.4.4 Acquire Tare
1. Place container on scale and wait for the
standstill annunciator ( ).
2. Press the
TARE
key to acquire the tare weight
of the container.
3. Net weight is displayed and the
annunciator lit to show the tare value was
acquired.
1.4.5 Remove Stored Tare Value
1. Remove all weight from the scale and wait for
the standstill annunciator ( ).
2. Press the
ZERO
key. The annunciator
goes off, indicating the tare value has been
removed.
1.4.6 Print Ticket
1. Wait for the standstill annunciator ( ).
2. Press the PRINT key to send data to the serial
port.
0
T
T