Rice Lake CLS-920i, Руководство по установке

Страница: 91 / 97

87 CLS-920i Installation Manual
10.8 Conversion Factors for Secondary Units
The 920i has the capability to mathematically convert a weight into many different types of units and instantly
display those results with a press of the
UNITS
key.
Secondary and tertiary units can be specified on the FORMAT menu using the SECNDR and TERTIA parameters,
or by using serial commands.
• To configure secondary or tertiary units using the front panel menus, use the Table 10-10 to find the
conversion multiplier for the MULT parameter. For example, if the primary unit is pounds and the secondary
unit is short tons, set the MULT parameter to 0.000500.
• To configure secondary or tertiary units using serial commands, use the Table 10-10 to find the conversion
multiplier for the SC.SEC.MULT or SC.TER.MULT command. For example, if the primary unit is pounds
and the secondary unit is short tons, send the serial command SC.SEC.MULT= 0.0005<CR> to set the
multiplier for the secondary units.
Note
Ensure that the secondary decimal point position is set appropriately for the scale capacity in the secondary
units. If the converted value requires more digits than are available, the indicator displays an overflow message
(
OVERFL ).
For example, if the primary units are short tons, secondary units are pounds, and the secondary decimal point is set
to 8888.888, the indicator will overflow if 5 tons or more are applied to the scale. With 5 tons applied, and a
conversion factor of 2000, the secondary units display needs five digits to the left of the decimal point to display
the 10000 lb secondary units value.
Primary Unit x Multiplier
Secondary/
Tertiary Unit
grains 0.064799 grams
0.002286 ounces
0.000143 pounds
0.000065 kilograms
0.002083 troy ounces
0.000174 troy pounds
ounces 437.500 grains
28.3495 grams
0.06250 pounds
0.02835 kilograms
0.911458 troy ounces
0.075955 troy pounds
pounds 7000.00 grains
453.592 grams
16.0000 ounces
0.453592 kilograms
14.58333 troy ounces
1.215278 troy pounds
0.000500 short tons
0.000446 long tons
0.000453 metric tons
Table 10-10. Conversion Factors