Rice Lake CLS-920i, Руководство по установке

Страница: 56 / 97

CLS-920i Installation Manual 51
5.3 Calibration Check
Press the
Calibration Check
softkey on the 920i to enter in a new calibration weight or keep the existing one if one
has already been entered.
".
$BODFM
4$"-&
MC
&NQ*%
(SPTT
130/VN
#BUUFSZ-JGF )PVST
)PNF
&OE
1MFBTFFOUFSUIFUFTUXFJHIU*%
5FTU8U*%
Figure 5-4. Calibration Check Screen
Enter a test weight ID number into the 920i and press
enter
. You are then asked to
Enter Test Weight Amount
using the
numeric keypad on the 920i. Enter that amount and press the
enter
key.
Then the following screen appears.
".
4UPSF/FX
$BM$IFDL
4$"-&
MC
&NQ*%
(SPTT
130/VN
#BUUFSZ-JGF )PVST
&YJU
1SFTTA4UPSF/FX$BM$IFDLPSA&YJUUPBCPSU
Figure 5-5. Store New Calibration Check Screen
Place the test weights on the forks of the scale at this time.
Press the
Store New Cal Check
softkey to store the new calibration check amount or press
Exit
to exit out of the
sequence. If the
Store New Cal Check
softkey is pressed the user is alerted that the
New Calibration Check is Stored
and
the screen goes back to the Main Menu screen.