Rice Lake CLS-920i, Руководство по установке

Страница: 64 / 97

CLS-920i Installation Manual 60
12. The indicator will then prompt
Cal-Match Point 1
. Carefully place the test weight on the left tine (from the
forklift operator’s point of view).
&/2+,)&4
,//+).'
$/7.
,%&44).%
With the weight in place, press the
Enter
key.
13. The indicator will then prompt
Cal-Match Point 2
. Remove the weight from the left tine and place it on the
right tine (you must use exactly the same test weight). When ready, press the
Enter
key.
14. The calibration will finalize. When done, press the
Save and Exit
softkey.
15. Calibration can be verified by placing the test weight on either tine - the reading must be the same.