Rice Lake BenchPro Series, Руководство по эксплуатации

Страница: 19 / 42

Calibration 15
17. Press to accept. XXX lb or XXX kg displays.
18. Press to scroll to the alternate calibrate weight value, if performing a calibration using certified weights.
If not using certified weights, skip to Step 19.
19. Press to accept.

is displayed.
20. Place the calibration weight on the scale and wait for the value to stabilize.
21. Press to accept. The calibration data is saved and the scale returns to the weigh mode.
The weight value displayed must match the value of the calibration weight used. If not, perform the calibration a
second time and follow each step carefully. If

displays, there is a calibration error. Ensure the correct
calibration weight value was selected in comparison to the actual calibration weight used. See Table 6-1 on page 34
for more information on troubleshooting.
4.2 Linear Calibration
Important
The linear calibration function should only be performed if instructed by Rice Lake Weighing Systems
and an authorized scale technician.
The BenchPro Series includes an optional linear calibration feature. This is an additional feature to perform after a
span calibration has been completed at maximum capacity and linear calibration is performed with two lower
calibration weight values.
1. To enter the calibration mode, remove weight platter and main cover plate.
2. Locate and press the service setup switch.
3. Place the weight platter back onto the scale.

is displayed.
4. Press until

is displayed.
5. Press to accept.

or

is displayed.
6. Press to scroll to

7. Press to accept.

is displayed.
8. Press .

is displayed.
9. Use Table 4-1 to choose the appropriate scale capacity.
10. Press to scroll to chosen capacity.
11. Press to accept.

is displayed
12. Press until

is displayed.
13. Press to accept.

is displayed.
14. Press twice.

is displayed .
15. With no weight on the weight platter, press to accept.

is displayed and then the first linear
calibration weight value.
16. Press to accept
.

is displayed.
17. Place the weight on the weight platter and wait for the value to stabilize.