22
Removing the Brushroll
WARNING!
To Reduce the Risk of Electrical
Shock or Injury from Moving Parts, Turn the
Vacuum Off and Unplug it.
The brushroll may need to be removed
at times to cut threads that have become
tangled around it.
To remove the brushroll, turn the nozzle
over and turn the two large screws 1/4
turn (Fig. 1). Lift off the baseplate. Pull the
brushroll out and remove the endcap (Fig. 2).
To reinstall the brushroll first loop the belt
over the end of the brushroll, then replace
the endcap (Fig. 3). Reinsert the brushroll
into the nozzle making sure the long sides
of the endcaps slide into the bottom housing.
To replace the baseplate, insert the tabs on
each end of the baseplate into the grooves
on the front of the bottom housing.
Tighten the two large screws. Make sure
the tabs on the front of the baseplate
are snapped securely in place on the
bottom housing.
MAINTENANCE AND CARE OF THE COMPACT POWER NOZZLE
Fig. 1
Fig. 2
Fig. 3
