12
OPERATION OF THE TANDEM AIR POWER NOZZLE
MATERIAL
DRAWN
ISSUED
SCALE
FINISH
DATE
DATE
DO NOT SCALE
UNLESS OTHERWISE SPECIFIED
DESCRIPTION
DRAWING SIZE:C
PART NUMBER
SHEET 3 OF 8
TACONY CORPORATION CLAIMS PROPRIETARY
RIGHTS IN THE MATERIAL DISCLOSED HERE IN.
THIS DRAWING IS ISSUED FOR ENGINEERING
INFORMATION ONLY. IT MAY NOT BE REPRO-
DUCED, NOR MAY THE INFORMATION HERE IN
BE USED FOR MANUFACTURING PURPOSES
WITHOUT WRITTEN PERMISSION FROM TACONY
CORPORATION.
0.250
TACONY CORPORATION
1760 Gilsinn Lane, Fenton, MO 63026
DESCRIPTION OF CHANGE
REV
PART NUMBER
SHEET
3 OF 8
X.X .5 mm RADII X.X .5mm
X.XX .25mm X.XX .25mm
X.XXX .12mm MACHINE SURFACE
X.XXXX .012mm BREAK SHARP CORNERS TO .25mm MAX
0 30" COMMON TO BE CONCETRIC TO .05mm
BY
ECN NO
DATE
REV
Fig. 1
Handle
Telescopic Wand
Wand Extension Button
(to extend wand)
Handle Release Button
On/Off Control for Power Nozzle
Fig. 3
Fig. 2
Handle
Telescopic Wand
Tandem Air
Power Nozzle
Fig. 4
Turning On the Power Nozzle
The power nozzle can only be turned on if the
canister is also turned on. The canister On/Off
switch is located on the main body. The
power nozzle On/Off switch is located on
the handle. Simply press the switch forward
to engage the power nozzle.
Reclining the Handle
Press the Handle Release Pedal located on
the back of the vacuum with your foot to
recline the handle (Fig. 1).
Removing and Inserting the Wand
Removing the wand from the power nozzle
allows you to use cleaning tools for baseboard
or ceiling cleaning. To do this, first turn the
power nozzle and canister off. Then, press
the wand release button, pull the wand out
and turn the canister on (Fig. 2).
To reinsert the wand into the power nozzle,
turn off the canister and simply press the
wand back into the neck of the power nozzle.
The wand will then click into place.
Jammed Brushroll Warning Lights
(Premium model only)
This power nozzle is equipped with a safety
system that protects it from a jammed
situation. Items that cause jammed brushrolls
include socks, excessive threads and corners
of area rugs. The warning indicator lights in the
headlight lens will change to flashing red should
this condition occur (Fig. 3).
• Turn off the vacuum cleaner and the power
nozzle then unplug the power cord.
• Remove the object preventing the brushroll
from turning.
When the unit is turned back on, the red
warning indicator lights in the headlight lens
will be off if the jam has been successfully
removed.
Jammed Brushroll Circuit Breaker
(Deluxe Model Only)
This power nozzle is equipped with a circuit
breaker safety system that protects it from a
jammed situation.
• Turn off the vacuum cleaner and the power
nozzle then unplug the power cord.
• Remove the object preventing the brushroll
from turning.
• Locate the circuit breaker switch on the
back of the power nozzle and press it to
reset the breaker (Fig. 4).
If the breaker trips again, repeat these steps to
correct the problem. If this does not correct
the problem, contact your authorized Riccar
retailer for further assistance.
