19
MAINTENANCE AND CARE OF THE FULL SIZE POWER NOZZLE
Fig. 1
Fig. 3
Fig. 4
Fig. 2
Replacing the Power Nozzle Belt Cont.
Insert the brushroll back into the brushroll
tray and place the belt guard back into
position (Fig. 1).
Spin the brushroll with your hand to make
sure it spins freely. Place the metal bottom
plate onto the unit (insert the front end of the
bottom plate first). Re-insert the two bottom
screws and secure (Fig. 2).
Replacing the Bulb
WARNING!
To Reduce the Risk of Electrical
Shock or Injury from Moving Parts, Turn the
Vacuum Off and Unplug it.
Turn the power nozzle over and remove
the bottom plate by first unscrewing the two
bottom plate screws located by the rear
wheels (Fig. 2).
Remove the two top cover screws (Fig. 3).
Turn the power nozzle back over, push the
neck flat, and remove the top cover.
Simply pull the bulb out (no twisting) and
reinsert a factory-authorized bulb (Fig. 4).
Place the top cover back on the unit, turn
the machine over and re-insert the two top
cover screws. Reinstall the bottom plate.
