Riccar PRIMAP.CPN, Руководство пользователя

Страница: 16 / 28

MATERIAL
DRAWN
ISSUED
SCALE
FINISH
DATE
DATE
DO NOT SCALE
UNLESS OTHERWISE SPECIFIED
DESCRIPTION
DRAWING SIZE:C
PART NUMBER
SHEET 8 OF 8
TACONY CORPORATION CLAIMS PROPRIETARY
RIGHTS IN THE MATERIAL DISCLOSED HERE IN.
THIS DRAWING IS ISSUED FOR ENGINEERING
INFORMATION ONLY. IT MAY NOT BE REPRO-
DUCED, NOR MAY THE INFORMATION HERE IN
BE USED FOR MANUFACTURING PURPOSES
WITHOUT WRITTEN PERMISSION FROM TACONY
CORPORATION.
0.250
TACONY CORPORATION
1760 Gilsinn Lane, Fenton, MO 63026
DESCRIPTION OF CHANGE
REV PART NUMBER SHEET
8 OF 8
X.X .5 mm RADII X.X .5mm
X.XX .25mm X.XX .25mm
X.XXX .12mm MACHINE SURFACE
X.XXXX .012mm BREAK SHARP CORNERS TO .25mm MAX
0 30" COMMON TO BE CONCETRIC TO .05mm
BY ECN NO DATE REV
SCALE 0.400
SCALE 0.400
MAINTENANCE AND CARE OF THE TANDEM AIR POWER NOZZLE
Replacing the Squeegee
WARNING! To Reduce the Risk of Electrical
Shock or Injury from Moving Parts, Turn the
Vacuum Off and Unplug it.
This power nozzle is equipped with a squeegee
on the bottom to improve its effectiveness in
cleaning bare floors.
If the squeegee splits or begins to look worn,
simply slide the worn squeegee from its track
and slide a new one into the track (Fig. 1). If you
have trouble installing the new squeegee,
contact an Authorized Riccar Retailer for
further assistance.
Removing the Bottom Plate
Turn the power nozzle over. Turn the two screws
1/4 turn (Fig. 2) to release the bottom plate. Lift
off the bottom plate.
Replacing the Bottom Plate
Line up the hinges on the bottom plate then
press the plate into position. Replace the two
screws and turn 1/4 turn to tighten.
This power nozzle has an optional Soft Carpet
bottom plate for vacuuming plush or dense
carpet types with greater ease. If your home
has soft carpet and you find pushing the power
nozzle with the standard bottom plate across
your carpet difficult, you should remove the
standard bottom plate and install the Soft
Carpet bottom plate.
14
MATERIAL
DRAWN
ISSUED
SCALE
FINISH
DATE
DATE
DO NOT SCALE
UNLESS OTHERWISE SPECIFIED
DESCRIPTION
DRAWING SIZE:C
PART NUMBER
SHEET 4 OF 8
TACONY CORPORATION CLAIMS PROPRIETARY
RIGHTS IN THE MATERIAL DISCLOSED HERE IN.
THIS DRAWING IS ISSUED FOR ENGINEERING
INFORMATION ONLY. IT MAY NOT BE REPRO-
DUCED, NOR MAY THE INFORMATION HERE IN
BE USED FOR MANUFACTURING PURPOSES
WITHOUT WRITTEN PERMISSION FROM TACONY
CORPORATION.
0.250
TACONY CORPORATION
1760 Gilsinn Lane, Fenton, MO 63026
DESCRIPTION OF CHANGE
REV PART NUMBER
SHEET
4 OF 8
X.X .5 mm RADII X.X .5mm
X.XX .25mm X.XX .25mm
X.XXX .12mm MACHINE SURFACE
X.XXXX .012mm BREAK SHARP CORNERS TO .25mm MAX
0 30" COMMON TO BE CONCETRIC TO .05mm
BY ECN NO DATE REV
Fig. 2
Fig. 1