23
Key Replacement Parts
• Genuine HEPA Media Vacuum Bags:
RCH-6
• Genuine Filter Sets:
RF19
(HEPA media and charcoal)
RF19G
(HEPA media and granulated charcoal)
• Genuine Belt:
B350-2514
(Full Size Power Nozzle)
B354-5200
(Compact Power Nozzle)
B014-0814B
(Tandem Air Deluxe Nozzle)
• Soft Sweep Bare Floor Tool Microfiber Pad 3 Pack:
RSSP-3
Please check each item below if you have trouble with your vacuum.
WARNING!
To Reduce the Risk of Electrical Shock or Injury from Moving Parts, Turn the
Vacuum Off and Unplug it.
PROBLEM SOLVING GUIDE
Problem
Check Point
Possible Solution
Suction power is weak.
Vacuum bag
If vacuum bag is full, replace it.
The vacuum does not work.
Wand, tools or hose
If clogged or blocked, remove
the object.
The hose adapter is not
inserted completely into
the suction opening of
the vacuum.
Insert it completely.
When the vacuum
bag is full or any of
the accessories are
blocked, the over-heating
protection for the motor
is activated.
Turn the vacuum off and
unplug the vacuum. Check the
vacuum bag and accessories
and remove any blockages.
The vacuum can be turned
on again after approximately
20 minutes.
Power cord does not retract. Power cord
Tug the power cord a little until
it starts to retract.
Power cord won’t pull out of
the vacuum.
Power cord
Do not pull it out by force.
Contact an Authorized Riccar
Retailer for further assistance.
Any other service should be performed by an Authorized Riccar Retailer.
To locate your nearest Authorized Retailer, visit our website at
Riccar.com
or call
1-888-6-RICCAR.
