Turning On the Power Nozzle
The power nozzle can only be turned on if
the canister is also turned on. The canister’s
On/Off switch is located on the main body.
The power nozzle On/Off switch is located
on the handle. Simply press the switch
forward to engage the power nozzle.
Using the Power Nozzle
After turning on the canister and the power
nozzle, lower the wand by pressing the
left pedal on the back side of the power
nozzle (Fig. 1).
Removing and Inserting the Wand
Removing the wand from the power
nozzle allows you to use cleaning tools for
baseboard or ceiling cleaning. To do this, first
turn the power nozzle and the canister off.
Then, press the wand release collar pictured
below pull the wand out and turn the canister
on (Fig. 2).
To reinsert the wand into the power nozzle,
turn the canister off and press the wand back
into the neck of the power nozzle. The wand
will then click into place.
Carpet Height Adjustment
Your power nozzle has six different settings
to clean a variety of carpet types and floor
surfaces. To adjust the carpet height setting
of the power nozzle, press the right pedal
located on the back of the power nozzle
(Fig. 3). Each press of this pedal will adjust
the height to the next carpet height position.
To determine which setting you are currently
on, look through the height indicator window
on the top of the unit. You will see one of the
six settings detailed below (Fig. 4).
Setting: Intended Use:
1. XHI
Very plush carpet
2. HI
Plush carpet
3. Auto
General carpet thickness
or bare floors
4. MED
Medium pile carpet
5. LO
Low pile carpet
6. XLO
Indoor/Outdoor carpet
16
OPERATION OF THE FULL SIZE POWER NOZZLE
Fig. 1
Fig. 4
Fig. 2
Fig. 3
