Manual CE (SAGOMA_GB)
is displayed.
Press
buttons 4
and
5
and modify the values of the function displayed. Set at 0 each coin from A
to P
which the coin-mechanism must accept and at 1 all the coins which the machine must not
accept. This set of parameters is working only when the tubes of the coin-mechanism have inside
enough coins to give back change.
Pressing again
button 2
the display will show the set of the parameters that will be active when the
tubes of the coin-mechanism don’t have enough coins inside to give back change. From:
COIN A NO-RE
X
until:
COIN P NO-RE
X
Press
buttons 4
and
5
and modify the values of the function displayed. Set at 0 each coin from A
to P
which the coin-mechanism must accept and at 1 all the coins, which the machine must not
accept.
By pressing
button 2
the following messages:
TUBES VALUE
XXXXXXXX
is displayed.
This value means the total of money inside the tubes of the coin-mechanism.
At the end of programming, press
button 1
.
12.5.9 Pre-setting of functions based on the internal
clock
The machine is equipped with an internal clock able to up-date the time also when the machine is
switched off. Some functions of the machine are based on the internal clock:
to modify the presettings of the clock, in the programming mode, push
button 1
until the sub-menu
PROGRAMMING - - -
CLOCK - - - - - - - - - -
is displayed.
Press
buttons 2
and
3
and choose the function, which requires to be altered. Press
buttons 4
and
5
and modify the value of the displayed function. The first two functions are:
SWITCHING ON
XX.XX
SWITCHING OFF
XX.XX
The time when the machine should be switched on and off (hh.mm) can be programmed. When
the machine is off, only the option to accept coins and selections is disabled. Furthermore, as a
45/45
