Manual CE (SAGOMA_GB)
position: this occurs when the group
movement motor is started. The lower filter
is moved to close the brewer and press the
preset throw the compress of ground
coffee; *
in which the water level is kept constant, is
conveyed by pressure in the coffee boiler by
means of a pump. After the activation of a
solenoid valve, the same quantity of warmed up
water is then conveyed to the coffee group.
6) The coffee group ends the cycle.
* The operations marked with asterisk may be carried out in a different order according to the
electronic presetting of the machine.
5.5 Preparation of filter coffee
This procedure is carried out only in the models equipped with a coffee brewing group (models
FB
), after the cup has been correctly positioned under the outlet pipes for the beverage vending.
The execution priority between this procedure and the procedure for the preparation of hot
beverages from instant ingredients is pre-set by the programme of the machine and varies
according to the selection chosen.
1) The geared motor activates a screw feeder, which pours the pre-set quantity of ground coffee
into the coffee group;
2) The coffee group moves to brewing position: this occurs when the group movement motor is
started. The upper filter moves upwards to close the brewer and press the pre-set quantity of
ground coffee;
3) The water coming from a water-refilling tank means of a pump. After the activation of a
solenoid valve, the same quantity of warmed up water is then conveyed to the coffee group.
4) The coffee grounds are ejected and the group returns to rest position: this occurs when the
group movement motor is started. The upper filter moves and opens the brewer. The coffee is
ejected by the combined action of the lower filter and the ejection blade.
5.6 Dispensing of the stirrer
This procedure is carried out only in models equipped with stirrer feeder (
Version
E
), and it is
carried out when the cup is correctly positioned under the outlet pipes for the beverage vending.
The stirrer can be dispensed before or after the preparation of a beverage, according to the
machine programme and selection made. Furthermore, a programmable function allows the user
to pre-set selections for which the stirrer is to be dispensed.
1) The unclamping electromagnet detaches the stirrer from the stack in the feeder. The stirrer
slides in the cup.
5.7 Preparation of cold instant beverages
This procedure is carried out only in the models of machine equipped
with the refrigerating group for natural water (
Version
FP
), usually
when the cup is positioned under the outlet pipes for the beverage
vending.
1) The water inlet solenoid valve is activated to load water inside the
cold unit;
2) The corresponding solenoid valve in the refrigerating group is
activated and the correct quantity of water is poured into the
mixing bowl to dissolve the ingredients;
3) If present, the mixing bowl is activated;
11/11
4) The geared motor activates the screw feeder of the canister of