Manual CE (SAGOMA_GB)
•
NO SUGAR: the stirrer is dispensed with the drinks where sugar is added also when is
pressed the pre-selection NO SUGAR
•
ALL: the stirrer is dispensed with all the drinks
Programme this value at 1 to enable the connection.
At the end of the programming, press
button 1
to confirm the set data.
12.5.6 Diagnostics programmes
In the programming mode, a certain number of diagnostics programmes can be carried out in order
to test the correct operation of some components of the machine.
To modify the parameters, in the programming mode, press
button 1
until the sub-menu
DIAGNOSTICS - - - - -
- - - - - - - - - - - - - - - - -
is visualised.
Pressing again
button 2
, the display shows:
ABIL. DISPLAY
TEMP. 1=YES 0
is displayed.
According to the value of the parameter, which can be modified with
buttons 4
and
5
, the inside
temperature of the machine is displayed in real time. Set the parameter to 1 (it is normally 0) to
have the display of temperature. To read the temperature, press
button 1
and exit from the
programming mode.
Pressing again
button 2
, the display shows:
CUP TEST
SEL. 4
Press
button 4
to dispense a cup.
Pressing again
button 2
, the display shows:
STIRRER TEST
SEL. 4
Press
button 4
to dispense a stirrer.
Pressing again
button 2
, the display shows:
SUGAR TEST
SEL. 4
Press button 4 to verify the correct sugar dispensing.
Pressing again
button 2
, the display shows:
TENSION
41/41
