G E T T I N G S T A R T E D
Using the Application Processor (AP) (Model 500AP-4K and 550AP-4K only)
350-11751-01 – updated October 2018
MediaWall V User’s Guide
31
RGB
The
MediaWall V
AP is an embedded, dedicated processor that provides a shared computing
resource to
MediaWall V
users for running applications and decoding IP streams.
The
MediaWall V
AP turns on and starts Windows automatically when the display processor is
turned on. RGB Spectrum factory-configures the default Computer Name, User Name, and
Password as follows:
■
Computer Name:
MediaWall_V_PC
■
User Name:
MediaWall_V
■
Password: (no password)
Note
Do not attempt to modify and over-write a preset. Instead, follow these steps:
1.
Load the preset.
2.
Arrange your windows and route your sources to outputs as needed.
3.
Delete the preset.
4.
Save the preset again in the previous location and under the previous name.
For detailed instructions to load and delete presets, refer to
.
2.4 Using the Application Processor (AP) (Model 500AP-4K and 550AP-4K only)
Important
Do not make changes to the AP hardware and software environment, unless
specifically instructed to do so by RGB Spectrum Technical Support.
Unlike a conventional, general-purpose PC, the
MediaWall V
AP is a purpose-built
appliance intended for two specific uses: running applications and decoding IP
streams. RGB Spectrum has carefully chosen and thoroughly tested the AP
hardware and software to work together to perform these tasks optimally.
To ensure that the AP’s performance is not compromised in the future by
incompatible software,
do NOT do any of the following
:
■
Update device drivers;
■
Change BIOS settings;
■
Enable automatic Windows updates;
■
Update VLC Media Player to a newer version; or
■
Upgrade Windows 7 to a newer version.