RexXer Tuning GmbH
l Astheimer Str. 41 l DE - 65428 Rüsselsheim l Fon: +49 (0) 6142 / 793971-203 l Fax: +49 (0) 6142 / 793971-80
www.rexxer.eu
© by RexXer ECU Tuning
10
- Information -
This menu group shows you device specific information
such as the serial number, currently loaded firmware etc. of your RexXer
EVO User.
Readout and save the Original-Mapping
5)
Press “Tuning” and select your brand and model in the menu. Follow
the instruction of the device and read (copy) the original-mapping of the
ECU**.
Figure 2: vehicle selection:
In this window
you have to choose your connected vehicle. Confirm your
choice with the right pointing arrow. First select the brand and after that the model.
Notes:
*Do not take the RexXer EVO User via the USB cable of your computer
/notebook and simultaneously connect over the serial interface cable with the
bike, otherwise briefly flies too much tension in the device and there is
damage!
**The reading of the original mapping may take up to 45 minutes (K-Line),
depending of the ECU type! The reading starts prompt automatically after the
confirmation; you do not have to be present the entire time.
