RexXer Tuning GmbH
l Astheimer Str. 41 l DE - 65428 Rüsselsheim l Fon: +49 (0) 6142 / 793971-203 l Fax: +49 (0) 6142 / 793971-80
www.rexxer.eu
© by RexXer ECU Tuning
26
- Is it possible to re-use the RexXer EVO User on another vehicle
(after vehicle sale)? (page 20)
The RexXer EVO User will be delivered with 2 licenses included. After
the Original-mapping is restored into the ECU of the accompanying
vehicle (on which the device was used firstly) you can deleate the
Rexxer for 1 time over the software.
- Can I use the RexXer EVO User even if all licenses are used?
(page 20)
Yes, you can recharge the device with a new license (chargeable).
- What must be observed after an update of my RexXer EVO User?
(page 14)
The RexXer EVO User gets “married” with the vehicle identification
number (VIN) stored in the engine control unit (ECU). This enables the
device to communicate with the ECU also after an Update with a
Workshop tester or another programming device.
- Can the RexXer EVO User diagnostic functions be used
concurrently on a different vehicle? (page 17)
Yes, if the serial interface cable of both vehicles is the same. Please note
the compatibility of the possible diagnostic and service functions!
- What can I do if the display of the RexXer EVO User only reacts by
high pressure? (page 9)
Connect the device to your vehicle
and select the menu item “Tools”.
Now
Choose “Calibration”, here you can adjust the sensibility of the
Touch display.
