RexXer Tuning GmbH
l Astheimer Str. 41 l DE - 65428 Rüsselsheim l Fon: +49 (0) 6142 / 793971-203 l Fax: +49 (0) 6142 / 793971-80
www.rexxer.eu
© by RexXer ECU Tuning
24
ECU types
Here you will find an overview of the ECU types which are possible to
flash and more descriptions of the function:
http://www.rexxer.eu/downloads/RexXerEVO_ecu_functions.pdf
For some ECU
types it’s not possible technically to read the original
mapping by using the RexXer EVO. Currently, this affects the Ducati
models with ECU Type Siemens VDO M3C and Mitsubishi MELCO for
example.
For these types of ECU a dummy will create by reading the original
mapping. This includes among others the serial number of the ECU.
But we found a way to read the original mappings of the affected types of
ECU in the open state with a special process and so we are able to
make it available as needed. The data such as firmware number,
microprocessor type etc. of the already read Original-Mappings are
stored in deploying the firmware on the vehicle selection in the RexXer
EVO. The RexXer EVO then makes when reading the original mapping a
check and reviews whether the data of the currently processed ECU
already exist. If not, the RexXer EVO shows you then a warning
message on the display. On most models, the existing mappings are
compatible and can be used.
As we cannot generalize this, we ask
you to contact us in this case and give us the data of the ECU, we
will then give notice of the examination process what you have to
do.
By confirmation in the display, the program will be continued and
read the dummy. To cancel the programming, for safety reasons, please
disconnect the connection to the diagnostic connector/inspection plug.
