RexXer Tuning GmbH
l Astheimer Str. 41 l DE - 65428 Rüsselsheim l Fon: +49 (0) 6142 / 793971-203 l Fax: +49 (0) 6142 / 793971-80
www.rexxer.eu
© by RexXer ECU Tuning
4
Precaution
Declaration of conformity
The
product
meets
the
essential
requirements of Regulation N.10 ECE.
The mark is located on the rear side of
the tool. The product is in conformity
with ECE standards only if used with
cables and accessories supplied and
according to what specified in the user
guide.
The device complies with Part 15 of the
FCC Rules (47 CFR). The mark is
located on the rear side of the tool. The
product is in conformity with FCC
standards only if used with cables and
accessories supplied and according to
what specified in the user guide.
Safety
This product has been designed with the highest concern for safety.
However, any electrical device, if used improperly, has the potential for
causing fire, electrical shock or personal injury. To help ensure accident-
free operation, follow these guidelines:
•
Observe all warnings, precautions and instructions.
•
Stop use, unplug the USB cable from the PC and disconnect any
other cables immediately if the device functions in an abnormal
manner, produces unusual sounds or smells, or becomes too hot to
touch.
•
Never disassemble the product or accessories. Use the RexXer EVO
User and accessories according to the instructions and guidelines
provided in the user guide. No authorization for the analysis or
modification of the product, or the analysis or modification of the
software, or the analysis of its circuit configuration, is provided.
Disassembling will void the product warranty and may be dangerous.
