SuperCleanox Operating instructions
Page
37
of 62
16
Working with the "SuperCleanox"
Our many years of experience in welding and handling pickling chemicals
has enabled us to develop this highly effective and environmentally friendly
electrochemical high-current cleaning process with carbon brushes.
Low doses of electrolytes are used that alone have no cleaning or
marking effects.
Electrolysis is only set in motion when current flows.
An increase in temperature on the surface of the workpiece starts
the chemical cleaning process.
Important for good results:
precise matching of electrolytes
voltage types
amperage
correct selection of electrode material
The unsurpassed cleaning effect is achieved through:
Strong high current source
Millions of small arcs at the ends of the carbon fibres.
The electrolytes can therefore be produced from non-toxic mineral
acids in very low concentrations, and nevertheless provide
unmatched cleaning performance.
16.1 Cleaning / polishing with the carbon fibre brush
16.1.1 Preparation
Carbon fibre brush
Earth connection
Cleaning electrolyte
Polisher electrolyte
