SuperCleanox Operating instructions
Page
36
of 62
Note
4mm safety plugs have no locking mechanism.
To remove, simply pull the plug out of the appliance.
Safety Information
Never pull the plug out of the jack by the cable!
This can damage the cables.
Never put weight on the plug transversely.
Jacks can easily break at the edges
This applies to all electrical connections!
Safety information
Make sure you use the correct cable cross-section and plug type for the
different work steps.
1.5mm² for marking and polishing with a carbon electrode
10/16mm² for cleaning and polishing with a brush
15.4.1 Changing the marking felt
First remove the O-ring (3)
Now remove the felt (4)
Dispose of the felt properly
Use a white marking felt (4) for marking.
Use a yellow felt (5) for cleaning.
Fold the felt in half and lay it over the
carbon electrode (2).
Secure the felt with the O-ring (3)
supplied.
1 Marking handle
2 Carbon electrode
3 O-ring
4 Felt
Marking stamp
3
Cleaning stamp
4
2
1
1 Marking handle
2 Carbon electrode
3 O-ring
4 Felt, white
5 Felt, yellow
Marking stamp
Cleaning stamp
4
3
2
1
5
