SuperCleanox Operating instructions
Page
11
of 62
Protection measures
Repairs to electrical parts of the "SuperCleanox" or electric cables
may only be carried out by qualified electricians.
Let a qualified electrician check the "SuperCleanox" immediately after
a short circuit or malfunction.
Only use the "SuperCleanox" and accessories as intended.
Only operate the "SuperCleanox" in the defined work area.
Avoid stray currents.
Connect the earth wire directly to the workpiece or to the retainer
intended for the workpiece.
Lay the cleaning electrode or handle down on the workpiece or work
surface in such a way that the electrode or the felt / carbon fibre brush
has no contact with the metal surface. Otherwise current will continue
to flow, which can cause damage or even danger.
In the event of an accident, immediately disconnect the "SuperCleanox"
from the mains. Always pull out the plug when carrying out maintenance work.
Only operate the "SuperCleanox" wearing appropriate,
personal, acid-proof protective equipment [protective gloves, apron and goggles].
Always switch the "SuperCleanox" off before changing the
processing tools (brushes, felts...).
Secure hot objects against unintentional contact.
Never eat or drink at your workplace! It is prohibited!
After working with electrolytes, always wash your hands thoroughly
with soap and water.
Wash spilled electrolyte fluid off immediately with plenty of water.
Please observe the detailed instructions in our EC safety data sheet
for these electrolytes.
Store the "SuperCleanox", accessories or chemicals out of reach of
children.
Persons with cardiac pacemakers may:
not work with the "SuperCleanox"
not stay in the immediate vicinity of the "SuperCleanox"!
!
