SuperCleanox Operating instructions
Page
16
of 62
6.2 Unloading
Only use lifting equipment and a means of transport that is approved for
the corresponding load to unload the equipment supplied.
All lifting equipment and accessories must be suitable for the intended
purpose and comply with current safety standards.
6.3 In-house transport
For in-house transportation, you must use lifting equipment and a means
of transport that is suitable for the intended purpose and complies with
current safety standards.
6.4 Unpacking
Remove the protective film, if present.
Remove the strapping with which the load is secured to the pallet.
Cut through the strapping with wire cutters.
Lift the Euro plastic box(es) carefully from the pallet.
To do this, only use suitable lifting equipment with safe sling attachment
aids.
Open the Euro plastic box carefully.
Safety information
The strapping is under high mechanical tension. Do not stand in the
"trajectory" of the two strapping parts. Never hold the strapping whilst cutting.
This could result in cuts.
Wear appropriate protective clothing.
6.4.1 Opening the Euro plastic box
First cut through the lead seal with metal shears.
Remove the lead seal carefully.
Remove the cable ties on the right and left of the lid latches.
Unlock the lid latches
To do this, slide the lid latches to the left or the right.
Open the transport box.
Check the delivery against the delivery note for completeness.
Report missing, damaged or undelivered goods immediately.
Safety information
Cutting the lead seal with the metal shears can cause sharp edges. Wear
gloves when removing the lead seal, to avoid cuts!