Retsch ABP 250, Руководство пользователя

Страница: 19 / 57

Packaging, Transport and Installation
19
4.4 Conditions for the Installation Site
A floorspace of 1190 mm wide and 630 mm deep is required. The opening of the feed hopper
is at a height of approx. 1430 mm.
The ABP 250 may only be installed on a level, firm base. Anchoring is not essential because
the free moments of inertia only pass barely perceptible vibrations on to the surroundings, but it
is possible using the drill holes in the feet.
Only operate the ABP 250 at an installation site with sufficient lighting.

Installation height: max. 2
000 m above sea level

Ambient temperature: 5 °C
– 40 °C
WARNING
W3.0003
Serious personal injury
Contact between moving jaws in the grinding chamber

Accidentally reaching into the grinding chamber and between moving jaws
can cause serious injuries to hands.
•
Always operate the device with the feed hopper installed.
NOTICE
N7.0021
Ambient temperature
Temperatures outside the permitted range

Electronic and mechanical components may be damaged.

The performance data alter to an unknown extent.
•
Do not exceed or fall below the permitted temperature range (5 °C to
40 °C ambient temperature) of the device.

Maximum relative humidity < 80 % (at ambient temperatures
≤ 31 °C)
For ambient temperatures U
T
between 31 °C and 40 °C, the maximum relative humidity value L
F
linearly decreases according to L
F
=
–(U
T
– 55) / 0.3:
Ambient temperature
Max. rel. humidity
≤ 31 °C
80 %
33 °C 73.3 %
35 °C 66.7 %
37 °C 60 %
39 °C 53.3 %
40 °C 50 %
NOTICE
N8.0015
Humidity
High relative humidity

Electronic and mechanical components may be damaged.

The performance data alter to an unknown extent.
•
The relative humidity in the vicinity of the device should be kept as
low as possible.