Retsch ABP 250, Руководство пользователя

Страница: 23 / 57

First Commissioning
23
5.1 Installation of the Device
Fig. 3: Securing on the transport pallet
On delivery, the device is screwed onto the transport pallet.

Remove the four screws ( SC ) from the transport pallet.

Using a forklift, lift the ABP 250 up.

Attach the four feet of the device provided (vibration absorbers) to the base frame.

Place the ABP 250 onto the intended installation surface.
If the device is installed without the feet (vibration absorbers), it must be screwed to a level, firm
base.

Screw the ABP 250 to the base using four suitable hex screws.
Fig. 4: Device feet: do not push or pull device
NOTICE
N13.0002
Damage to the device feet
Pushing or pulling the device

If the device is pushed or pulled across a surface, this can damage the
device feet (vibration dampers).
•
Do not pull or push the device.
•
Lift the device if you need to move it.
SC