Kit Contents 3
Introduction and Overview 4
System Arming 4
Zones 4
Entry/Exit Delay 4
Zone Lockout 4
Tamper Protection 4
Voice Dialler 4
Jamming Detection 5
Battery Monitoring 5
System House Code 5
Planning and Extending your Wirefree
Alarm System 6
Control Panel 7
Positioning the Control Panel 7
Installing the Control Panel 7
Setting the Control Panel House Code 9
Remote Control Unit 9
Setting the Remote Control 10
Passive Infra-Red (PIR) Movement Detectors 10
Choosing a position the PIR Detector 10
Installing and configuring the PIR Detectors 11
Testing the PIR Detectors 12
Magnetic Contact Detectors 13
Installing and setting the Magnetic
Contact Detectors 13
Testing the Magnetic Contact Detectors 14
External Solar Siren 14
Positioning the Solar Siren 14
Installing the Solar Siren 15
Setting the Solar Siren 16
Initial Power-Up of the Solar Siren 16
Siren Service Mode 16
External Connections 17
Testing the System 17
Initial Testing 17
Testing an Installed System 17
Detector Test 17
Hard-Wired Solar Siren Test 18
Testing the System
(continued)
Solar Siren Test 18
Control Panel LED Test 18
Solar Siren Service Mode 18
Voice Dialler Test 18
Factory Defaults 18
Reset Factory Default Conditions 18
Programming Instructions 19
User Access Code 19
System House Code 19
Instant Delay Zones 19
Entry/Exit Delay 19
Alarm Duration 20
Part-Arm 20
Zone Lockout 20
Entry/Exit Warning Tone 21
Jamming Detection 21
Hard-Wired Siren 21
Zone Operating Modes 21
Telephone Numbers 22
Alarm Message Play Time 22
Record Alarm Message 22
Replay Alarm Message 23
Call Routing 23
Call Attempts 23
Dial Method 23
Operating Instructions 24
Arming the System 24
Arm 24
Part-Art 24
Disarming the System 25
Personal Attack (PA) Alarm 25
Tamper 25
Battery Monitoring 25
Maintenance 26
Alarm Record 27
Troubleshooting 28
Extending your Alarm System 30
Notes 31
Component Specification 32
Page No.
Page No.
Contents
2
For system installations incorporating the SA3CU E Control Panel refer to
this Manual and disregard any other instructions supplied.
