Resol DeltaSol B Pro Скачать руководство пользователя страница 2

DeltaSol

®

 

B Pro

© RESOL 04026 deltasol_b_pro.mon.pmd

Page 2/24

Impressum

This mounting- and operation manual including all parts is
copyrighted. Another use outside the copyright requires the
approval of RESOL - Elektronische Regelungen GmbH. This
especially applies for copies, translations, micro films and
the storage into electronic systems.

Editor: RESOL - Elektronische Regelungen GmbH

Important notice:

We took a lot of care over the texts and drawings of this
manual and to the best of our knowledge and consent. As
faults can never be excluded, please note:
Your own calculations and plans under consideration of the
current norms and DIN-directions should only be basis for
your projects. We don´t offer a guarantee for the com-
pleteness of the drawings and texts of this manual - they
only represent some examples.  They can only be used on
own risk. No liability is assumed for incorrect, incomplete
or false information and the resulting damages.

Errors and technical changes excepted

Contents

Security devices ................................................................. 2

Technichal data and function  survey ............................... 3

1.

Installation ............................................................. 4

1.1

Mounting ................................................................ 4

1.2

Electrical wiring .................................................... 4

2.

Sensor types .......................................................... 5

3.

Operation and function ......................................... 6

3.1

Adjustment switch ................................................ 6

3.2

Control parameter and indication channels ....... 6

3.2.1

Indication channles S1-S4 ..................................... 7

3.2.2

Indication channels H1 und H2 ............................ 7

3.2.3

∆∆∆∆∆

T-regulation .......................................................... 7

3.2.4

Maximum store temperture ................................. 7

3.2.5

Limit collector tempreture .................................. 8

3.2.6

Maximum collector temperature ......................... 8

3.2.7

Minimum collector tempreture ........................... 8

3.2.8

System cooling ....................................................... 9

3.2.9

Operation mode .................................................... 9

3.2.10 Oscillating charge .................................................. 9

3.2.11 Thermostat function ........................................... 10

3.2.12 LED blinking codes .............................................. 10

4.

Comissioning ........................................................ 11

5.

Tips for fault localization .................................... 11

6.

Examples .............................................................. 12

6.1

1 collector,1 store with heating reverse raising 14

6.2

System with store charge by solid hot fuel boiler

with heating reverse raising ................................ 15

6.3

Solar system with 1 collector, 1 store and after-

heating by solid hot fuel boiler ........................... 16

6.4

Solar system with 1 collector and 1 store with

heat exchange to existing store .......................... 17

6.5

Solar system with 1 collector and 2 stores

valve logic ............................................................. 18

6.6

Solar system with 1 collector and 2 stores

pump logic ............................................................ 18

6.7

East-/ west-collectors, 1 store ............................. 19

6.8

Solar system with 1 collector, 1 store and after-

heating .................................................................. 20

6.9

Standard solar system ......................................... 21

TRD 802

Steamboiler of group III,

TRD 402

Equipment of steamboiler systems with hot water

generators of group IV
DIN 1988, Part 1 – 8

Technichal rules for drinking water installation

DIN 4708, Part 3

Central warm water heating systems

DIN 4751, Part 1 + 2

Water heating systems

DIN 4753

Water heater and systems and for drinking water

DIN 4757, Part 1 – 4

Solar heating and solar thermal systems

DIN 18338

Roofing and roof sealing works

DIN 18339

Plumbers works

DIN 18451

Scaffolding works

VDE 0100

Set up of electrical operating supplies

VDE 0185

General rules for setting up overvoltage protection

systems
VDE 0190

Main potential equalization of electrical systems

DIN 18381

Gas-, water- and sewage installation systems

DIN 18382

Electrical cable- and line systems in housings

HeizAnlV

Heating system regulation

Safety regulations:

Please read the following
information carefully before
installing and operating the
controller. In this way damage
to the solar system by wrong
installation will be avoided.
Please observe that the
mounting is adapted to the
characteristics of the building,
that the local regulations are
respected and is conform to
the technical rules.

Содержание DeltaSol B Pro

























Отзывы: