Resodyn LabRAM I, Инструкция по установке и эксплуатации

Страница: 44 / 67

LabRAM I Installation and User Manual
HMI Operation – Setup and Configuration
Resodyn Acoustic Mixers 44 Rev. 072420
14
HMI Operation – Setup and Configuration
The LabRAM I offers the user extensive customization and flexibility. The Setup and Configuration
screen provides user control of optional features and manages the configuration of the LabRAM I. The
Setup and Configuration screen is accessed by touching the <Setup/Config> button from the Main
Screen. If logged in at Level 0 (operator), this button is
dis abled, while the button is en abled for all other
login levels (see below right), and the content of the Setup and Configuration screen is adjusted based
on the user’s login level.
The Setup and Configuration screen is laid out
in a tabbed format, similar to many modern
web browsers. Touching a tab title will switch
between tabs. Tabs are visible based on the
user’s login level. The table to the right
identifies the tabs and login level required to
access those tabs. The associated image
illustrates how the Setup and Configuration
screen changes appearance based on the
login level.
NOTE: The following descriptions and
instructions of the Setup and Configuration
screen in Section 14 HMI Operation
– Setup
and Configuration assume a Level 3
(Supervisor) login.
Tab Name Login Level Required
Status Supervisor Calibration Technician
Calibration Supervisor Calibration
Recipe Supervisor
Setup 1 Supervisor
Setup 2 Supervisor
Config Supervisor
Data Supervisor
Level 1 (Technician)
Level 2 (Calibration)
Level 3 (Supervisor)
Operator Level
<Setup/Config>
Button Disabled
Other Levels
<Setup/Config>
Button Enabled