LabRAM I Installation and User Manual
HMI Operation
–
Modes of Operation
Resodyn Acoustic Mixers
37
Rev. 072420
5.
The “Acceleration Control’ dialog will appear. The
acceleration setpoint can be entered in this dialog
and must lie between 0 and 100 values to be
accepted. To change the acceleration setpoint,
touch the textbox next to “g.”
6. A numeric keypad will appear. Enter the new
setpoint value and touch the <Enter> button to
close the keypad.
7. The newly entered setpoint will now appear in the
textbox. Touch the <Done> button to close the
“Acceleration Control” dialog.
NOTE: If the LabRAM I is mixing or in acceleration, the
setpoint will be used as soon as a valid setpoint was
entered. The LabRAM I does not wait for you to touch
<Done>.
8. The new setpoint will now be updated in the Main
Screen. To enter user-defined limitations and select
a Configuration, touch the <Config/Alarms> button.
