ResMed S8 Compact System, Руководство для клиницистов

Страница: 18 / 141

13
O
PERATING
I
NFORMATION
E
NGL
IS
H
U
SING
H
UMIDIFIERS
H
UMID
A
IRE
3i
The H
UMID
A
IRE
3i attaches to the front of an S8 C
OMPACT
device to provide heated
humidification ( Figure E in the illustrations sheet). No other accessories are required
for its use. Please refer to the HumidAire 3i User’s Manual for details.
Notes:
a. Make sure the water chamber of the HumidAire 3i is empty before you attach or
detach the humidifier.
b. Remove the connector plug on the S8 Compact (see section
A
of the illustrations
sheet) before you attach the HumidAire 3i. Reattach the connector plug firmly
after you detach the HumidAire 3i.
H
UMID
A
IRE
You need medium sized 21” (52 cm) air tubing to connect your S8 C
OMPACT
to a
H
UMID
A
IRE
humidifier. To set up the
S8 C
OMPACT
with the
H
UMID
A
IRE
:
1
Fill the H
UMID
A
IRE
with water, and place the filled water chamber inside. Connect the
medium 21” (52 cm) and long 6’6” (2 m) air tubing (
F-1
), and close the humidifier lid.
2
Place the S8 C
OMPACT
on top of the H
UMID
A
IRE
( F-2 ) and connect the free end of
the medium air tubing to the air outlet (
F-3
).
Note: To avoid water spilling into the S8 Compact, do not put it underneath the
humidifier.
3
Assemble your mask system and connect it to the free end of the long air tubing ( F-4 ).
4
Plug the H
UMID
A
IRE
power cord into a power outlet. Connect the S8 C
OMPACT
power
cord to the socket at the rear of the S8 C
OMPACT
and plug the other end into a power
outlet.
!
WARNING
Make sure that the power cord and plug are in good condition and the equipment
is not damaged.
The S8 C
OMPACT
is now ready for use with the H
UMID
A
IRE
.
R
ES
M
ED
P
ASSOVER
You need medium sized 21” (52 cm) air tubing to connect your S8 C
OMPACT
to a
ResMed
P
ASSOVER
humidifier. To set up the
S8 C
OMPACT
with the
P
ASSOVER
:
1
Fill the P
ASSOVER
with water and connect the medium 21” (52 cm) and long 6’6”
(2 m) air tubing (
G-1
).
2
Place the S8 C
OMPACT
on top of the P
ASSOVER
( G-2 ) and connect the free end of the
medium air tubing to the air outlet ( G-3 ).
338251r1.book Page 13 Friday, June 10, 2005 5:03 PM