Renova turborex TSP 180, Руководство по эксплуатации

Страница: 19 / 33

19
installation
• Disconnect the fans from the power supply; moving blades can be dangerous for the operator’s fingers.
• Remove the pneumatic power supply.
• Remove the cover and the pressure discs.
• Remove the two-side carter, being careful, if there is a 3-pole socket to cut the fan power supply wires
near the connector.
• Place the new kit and store the pressure disc with the bimetal thermostat facing the cover.
• Reassemble the brake.
• Power up the fans and check that they are working properly.
kit for 4 fans brake
For those applications where more heat dissipation is required, you can switch from 2 fans to 4 fans thanks
to the use of a special casing that allows the assembly of 2 fans one above the other.