Renova turborex TSP 180, Руководство по эксплуатации

Страница: 17 / 33

17
accessories
Our TX - TX / HD brakes can have, on customer request, some accessories that are not present in our
standard versions
.
RPM counter
One of the most used and requested accessories not present in our standard is the tachometer with its
sensor. These brakes will be supplied in the same composition as the standard brakes, except that a central
disc (the last in the assembly phase) will be replaced by a specially built central disc with one or more
"notches" for the tachometer.
Disco con tacche per contagiri HD
• position the sensor at a distance of about one millimeter from the central disk, shaped with notches
whose number and shape depend on the type of PLC management.
• then power up the sensor and check by turning the shaped central disk that the warning light on its upper
end flashes.
Below is the list of our available tachometers. By default, Renova supplies on its brakes a tachometer with
PNP connection normally open (NO), but on request the PNP versions normally closed (NC) and the NPN
versions both normally closed and normally open are also available.
Type Voltage Current Signal
distance
Wiring Renova Code
Standard 10 - 30 V CC <200 mA 1,5mm PNP (NO) CG00000000
Su richiesta 10 - 30 V CC <200 mA 1,5mm NPN (NO) CG00000NPN
Su richiesta 10 - 30 V CC <200 mA 1,5mm PNP (NC) CG00000000-NC
Su richiesta 10 - 30 V CC <200 mA 1,5mm NPN (NC) CG00000NPN-NC