29
Assembly of the front aluminium profiles
Place the prepared printer on its back and support it from below to
prevent damage to the main PCB.
Position the printer so that the front
left
aluminium profile is acces
-
sible.
Release and remove the 4 M5 cylinder-head screws that attach the
profile.
Remove das aluminium profile from the printer.
Remove the foot from the disassembled aluminium profile and put it
aside.
The short aluminium profile is no longer needed.
Insert the long aluminium profile into the printer and attach it at the top
with 2 of the 4 M5 cylinder-head screws.
Tighten the screws hand-tight.
Take the foot and screw it into the aluminium profile at the bottom.
