40
3. Intended Use
Intended use of the product is recording of transponder data via an aerial module.
These data are compared to the transponder data saved in an internal EEPROM by
the product.
If a saved transponder is recognised, the electronics switch a relay through which e.g.
a door opener can be controlled.
To use the product, you need special suitable transponders. They are not included in
the delivery.
Configuration of the product with user data, transponder data and time schemes is
possible comfortably with a PC software. For professional users, a configuration directly
via RS232 control commands is possible as well.
The safety notes and all other information in these operating instructions always have
to be observed.
Any other use than that described above is not permitted and will damage the product.
Additionally, this is connected to dangers, such as short circuit, fire, etc.
This product complies with the statutory national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
4. Scope of Delivery
• Control module
• Aerial module with cable
• RS232 cable
• Plastic side plate (for transponder in credit card build)
• CD with PC Software
• Operating Instructions
