Renishaw PHC10-3 PLUS Скачать руководство пользователя

Страница: 4 / 68

Product compliance

EU declaration of conformity

Contact Renishaw plc or visit

www.renishaw.com/EUCMM

for the full EU declaration.

UK declaration of conformity

Contact Renishaw plc or visit

www.renishaw.com/UKCMM

for the full UK declaration.

EMC conformity

This equipment must be installed and used in accordance with this installation guide. This product is intended for industrial use only and

should not be used in a residential area or connected to a low voltage power supply network which supplies buildings used for residential

purposes.

FCC (USA only)

Information to user (47 CFR 15.105)

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These

limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to

cause harmful interference, in which case you will be required to correct the interference at your own expense.

Information to user (47 CFR 15.21)

The user is cautioned that any changes or modifications not expressly approved by Renishaw plc or authorised representative could void the

user's authority to operate the equipment.

Equipment label (47 CFR 15.19)

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

PHC10-3 PLUS installation guide

www.renishaw.com

Issued 12 2021

Содержание PHC10-3 PLUS





































































Результаты поиска

Содержание PHC10-3 PLUS

Отзывы:

Похожие инструкции для PHC10-3 PLUS

Бренды по названию

Популярные бренды

Renishaw PHC10-3 PLUS, Руководство по установке

Результаты поиска

Содержание PHC10-3 PLUS

Отзывы:

Похожие инструкции для PHC10-3 PLUS

Бренды по названию

Популярные бренды