Renishaw PHC10-3 PLUS страница 13 Скачать руководство пользователя

Страница: 13 / 68

Introduction

The guide gives information on physical installation, system connections, communications and interface settings, as well as assistance in fault-

finding during the installation of PHC10-3 PLUS.

WARNING:

No attempt should be made to connect the PH10 PLUS system to any other any other system components as

incompatibility will result in damage to the product.

The guide should be read in conjunction with the PH10 PLUS series user's guide in order to fully understand the system's features, capabilities
and operation.

The PH10 PLUS series of motorised probe heads can only be used in conjunction with the PHC10-3 PLUS when part of an OEM system

installation. PHC10-3 PLUS has replaced the PHC10-2 and provides support for RS232 and USB communications (IEEE is no longer

supported). PHC10-3 PLUS uses an external power supply for the PH10 PLUS series of heads, manages all the head functions and

communicates via a suitable interface with the CMM's computer. PHC10-3 PLUS does not manage the probe functions but does have the

provision for an interface to be fitted.

PHC10-3 PLUS installation guide

www.renishaw.com

Issued 12 2021

Содержание PHC10-3 PLUS





































































Результаты поиска

Содержание PHC10-3 PLUS

Отзывы:

Похожие инструкции для PHC10-3 PLUS

Бренды по названию

Популярные бренды

Renishaw PHC10-3 PLUS, Руководство по установке

Результаты поиска

Содержание PHC10-3 PLUS

Отзывы:

Похожие инструкции для PHC10-3 PLUS

Бренды по названию

Популярные бренды