Renfert Pillo, Инструкция по эксплуатации

Страница: 7 / 18

The filter housing (Figure 7) must
not be removed from the connecting
tube. These will help maintain the
filter and will protect your
Renfert
deflasking chisel against dirt and
other contaminants.
6.2 Chisel Grinding
Dull chisels can be sharpened by grinding them.
Only tools and equipment intended specifically
for sharpening may be employed.
We can assume no liability for
damages resulting from improperly
ground chisels.
7. Spare Parts
For the order numbers of consumables and
spare parts please refer to the spare parts list at
the end of this manual.
8. Warranty
Provided the unit is properly used and with the
exception of components subject to normal
wear, Renfert
warrants the all components of
the Renfert deflasking chisel for a period of 3
years .
Warranty claims may only be made upon pres-
entation of the original sales receipt from the
authorized dealer.
Components subject to natural wear are exclud-
ed from this warranty. The warranty is voided
in case of improper use; failure to observe the
operating, cleaning, maintenance, and connec-
tion instructions; in case of independent repairs
or repairs by unauthorized personnel; if spare
parts from other manufacturers are employed,
or in case of unusual influences or influences
not in compliance with the utilization instruc-
tions.
Warranty service shall not extend the original
warranty.
9. Technical Specifications
9.1 Pillo
Nominal operating pressure: 5 bar
[72 psi]
Operating pressure: 4 – 6 bar
[58 – 87 psi]
Air consumption, max.: 9 l/min
Piston frequency, approx.: 110 Hz
Ahv*): 7,3 m/s²
LpA**): 79 dB(A)
Dimensions: Ø 29 x 157 mm
[Ø 1,14 x 6,18 inch]
Weight: ca. 300 g
*) hand/arm vibration in accord. with EN ISO 5349-1
**) sound pressure level in accord. with DIN EN ISO 11202
9.2 Power pillo
Nominal operating pressure: 5 bar
[72 psi]
Operating pressure: 4 – 6 bar
[58 – 87 psi]
Air consumption, max.: 10 l/min
Piston frequency, approx.: 130 Hz
Ahv*): 5,2 m/s²
LpA**): 82 dB(A)
Dimensions: Ø 29 x 168 mm
[Ø 1,14 x 6,61 inch]
Weight: ca. 398 g
*) hand/arm vibration in accord. with EN ISO 5349-1
**) sound pressure level in accord. with DIN EN ISO 11202
10. Standard Delivery
1 Renfert Deflasking Chisel
1 Chisel insert Nr. 5022-0200
1 Connecting hose
1 Connector fitting set
1 Spare parts list
1 Operating instructions
- 14 - EN