![RenewAire LE-8X*INH Series Скачать руководство пользователя страница 6](http://html1.mh-extra.com/html/renewaire/le-8x-inh-series/le-8x-inh-series_shipping-rigging-hoisting-and-assembly-manual_1441006006.webp)
SHIPPING, RIGGING, LIFTING AND ASSEMBLY: LE MODELS
RENEWAIRE.COM
INSTALLATION, OPERATION AND MAINTENANCE MANUAL
1.800.627.4499
6
SHIPPING
1.0 SHIPPING
1.1 RECEIVING AND HANDLING
1.2 STORAGE BEFORE INSTALLATION
All ERVs are palletized and then shipped by common carrier. It is the installer’s / customer’s
responsibility to coordinate delivery and properly handle the shipment during unloading and storage.
Upon delivery of the ERV, inspect it carefully for shipping damage and completeness. Verify the pres-
ence of any accessories such as external hoods that are to be field-installed or filters that are shipped
loose. If shipping damage is discovered, take digital pictures and note the visible damage on the ship-
ping manifest. Notify your RenewAire dealer immediately.
Note that whenever possible, accessories such as weather hoods are assembled and then secured for
shipping inside the ERV.
See photo below.
LE ERV Hood Shipping Location (typ)
Hoods are assembled at the factory and
then secured for shipment inside the ERV.
LE models can be delivered in two modules for on-site assembly or as a complete unit (additional
charges apply).
In all cases, extra protective pallet materials may have been added; this material was added at the
factory to protect the unit or modules during shipping.
In all cases, when shipped as modules, assembly materials ship loose and can be found inside the
modules. Note that assembly materials must be removed and installed prior to unit operation.
For rooftop models, the outdoor air weather hoods ship loose and can be found inside the modules.
Note that weather hoods and assembly materials must be removed and installed prior to unit operation.
If installation will not occur immediately following delivery, store equipment in a dry protected area
away from construction traffic and in the proper orientation as marked on the packaging with all in-
ternal packaging in place.
When placing the ERV on the ground, the placement area should be flat and level. Take care to avoid
twisting or wracking of the unit.