SHIPPING, RIGGING, LIFTING AND ASSEMBLY: LE MODELS
RENEWAIRE.COM
INSTALLATION, OPERATION AND MAINTENANCE MANUAL
1.800.627.4499
12
ASSEMBLY
4.5.2 Bolt Together Mating Roof Beams
Use bar clamps, or other non-destructive winching device to pull the top of the modules together tightly
compressing the gasket. After aligning the 4 roof bolt locations, insert 1/4” - 20 x 1.00” Grade 5 zinc
plated hex head bolts through the holes in the roof beam. Secure the nuts to secure the roof section.
www.renewaire.com (800) 627- 4499
AFTER THE LIFTING LUG AS-
SEMBLIES HAVE BEEN BOLTED
TOGETHER, RAISE ONE END OF
THE UNIT TO COMPRESS THE
GASKETING AND BRING BOTH
OF THE MATING ROOF BEAMS
INTO TIGHT CONTACT.
USE A PIPE CLAMP TO ADJUST
THE ROOF BEAMS LATERALLY
AND THEN BOLT TOGETHER
THE TWO ROOF BEAMS.
Roof Beam Assembly Graphic 1
Roof Beam Assembly Graphic 2
Roof Beam Assembly Bolt Locations
