17
INSTALLATION MANUAL FOR MODEL: GSE IP-195
THe PlUMBInG PARTs
13. Plumbing Parts Required for the system
The recommended brands and specifications of the rest parts of the system are listed below. The installers should pre
-
pare and make sure they are ready before the installation. The following parts shown in the photos are for the existing
water heater with 3/4 inch plumbing pipe connection.
Heating Cable:
M-D Building Products 64444 30-Foot Pipe Heating Cable with Thermostat
From the Manufacturer (http://www.mdteam.com M-D Customer Service: 1-800-654-8454)
UL and CSA approved electric pipe heating cable designed to prevent water line freeze up. Ready to install, grounded
cord and plug, thermostat controlled, with pilot light. Recommended for use on metal and rigid plastic pipes. Exclusive
Press-To-Test button test cable before installing! The built-in thermostat turns cable on at 38°F. Reliable low wattage
design uses up to 70% less energy than other cables and protects to -50°F!
Product Description
M-D Building Products 64444 30’ Pipe Heating Cable With Thermostat M-D Building Products 64444 30’ Pipe Heating
Cable With Thermostat Features: UL and CSA approved pipe heating cable designed to prevent water line freeze up
Ready to install, grounded cord and plug, thermostat controlled, with pilot light 30’
WATTs T&P Valve (one Unit):
Residential, Material of Construction Bronze, BtuH
Rating 100,000, Inlet 3/4 In, Outlet 3/4 In, MNPT x FNPT Connection, Height 6 3/4 In.
WATTs Mixing Valve (one Unit):
Series 70A, 3/4” Sweat Tempering Valve (120° -160°)
Series 70A temperature range: 120+F to 160+F.
Maximum Pressure: 150psi (10 bar).
Size Range: 3/4 in. (15 to 20mm)
Watts 3/4” Ball Valve (Three Unit):
Watts: 3/4 FBVS-4 ; 3/4” Sweat (Solder) Brass Ball Valve, Full Port. Connections: 3/4” NPT solder (sweat) on both ends.
Technical Specifications: 600 WOG / 150 SWP; 1/4-Turn Steel Handle; Solder Ends Meet ANSI B16.18.
3/4” CxCxC Tee and
Couplings
3/4” x 1/2” Copper x Female
Adapter (2 Pieces)
3/4” Copper x Female Adapter
3/4” Type L Copper Water
Tubing according ASTM B88
3/4” Drain Hose outlet
connection with NPT
threaded inlets
WATTS Series 70A
Mixing Valve.
WATTS 150psi T&p Valve
Model: DP100XL4
WATTS 3/4 FBVS-4 3/4
Sweat (Solder)
Brass Ball Valve
M-D 64444 30-Foot
PipeHeating Cable with
Thermostat
