R11UM0156EJ0240 Rev.2.40
Page 70 of 82
Jul. 28, 2020
PRIME v1.4 Base Node Tool
User Manual
Renesas Electronics Group Confidential
3
.
PC Tool operation procedure
PRELIMINARY
Notice This is not a final specification. Some
parametric limits are Subject to change.
3.17 Logging network topology change
This feature enables BN tool to record every network topology change as a text file. To active this
feature, se
lect “Output Start” in “Topology” menu which is submenu of “File” menu.
Figure 3.64 Operation to active logging network topology
All network topology change log files are found in the folder BN tool is installed. The file name format
is
” prime14_cpx3_pc_bn_topo_%Y%m%d%H%M%S.log”. For example, if the file contains some
information for the topology change at 12:00:00 Sep 30, 2016, the file name should
be ”prime14_cpx3_pc_bn_topo_20160930120000.log”.
The topology change log file shows six parameters for each node.
-
EUI48
EUI-48 of the node.
-
SID
SID of the node.
-
LNID
LNID of the node. For Base Node “0000” is given.
-
LSID
Local SID of the node. For Base Node “00” is given. For a Terminal Node “FF” is given.
-
VERSION
PRIME version of the node.
v1.3.6:
“00”
v1.4 BC:
“01”
v1.4:
“02”
-
STATE
The state of the node.
Terminal Node:
“01”
Switch Node:
“02”
Base Node:
“03”
Figure 3.65 Sample of the topology change log file.
