R11UM0156EJ0240 Rev.2.40
Page 69 of 82
Jul. 28, 2020
PRIME v1.4 Base Node Tool
User Manual
Renesas Electronics Group Confidential
3
.
PC Tool operation procedure
PRELIMINARY
Notice This is not a final specification. Some
parametric limits are Subject to change.
address compression method.
-
“Unicast Connection Timeout” specifies the time until the unicast connection with CL Type = 6
(CL_IPv6_UNICAST) is released with timeout.
-
“Multicast Connection Timeout” specifies the time until the multicast connection with CL Type = 6
(CL_IPv6_UNICAST) is left with timeout.
3.16.5
Data Settings
-
“Next Header” specifies the value of “Next Header” field in the IPv6 packet header.
-
“Src Address” specifies the value of “Source Address” field in the IPv6 packet header. If the “Use BN
Link-
local” is checked, the link-local address is used that is composed of
fe80::/64
as a network ID
and
“Modified EUI-64” as an interface ID. If user wants to use an address other than the link-local
address, set the address to the
“Src Address” box
without checking
“Use BN Link-local”
.
-
“Dest Address” specifies the value of “Destination Address” field in the IPv6 packet header. If the
“Link-local” is selected, the link-local address is used that is composed of
fe80::/64
as a network ID
and
“Modified EUI-64” as an interface ID. If user wants to use an address other than the link-local
address, set the address to the
“Dest Address”
.
Additionally, by pushing the “Load” button, the
link-local address of the node is shown in the
“Load address table from EUI” box.
3.16.6
Context Table
The BN tool can edit the context table used for the stateful address compression. By checking the
"Enable" column, the specified context information activates.
