manualshive.com logo in svg

Renesas M32R/ECU Series, Руководство пользователя, Страница: 91 / 839

Поделиться
Скачать
Renesas M32R/ECU Series Скачать руководство пользователя страница 91

4

4-2

EIT

32180 Group User’s Manual (Rev.1.0)

4.1  Outline of EIT

If some event occurs when the CPU is executing an ordinary program, it may become necessary to suspend the

program being executed and execute another program. Events like this one are referred to by a generic name as

EIT (Exception, Interrupt and Trap).

(1) Exception

This is an event related to the context being executed. It is generated by an error or violation during instruction

execution. This type of event includes Address Exception (AE), Reserved Instruction Exception (RIE) and Floating-

Point Exception (FPE).

(2) Interrupt

This is an event generated irrespective of the context being executed. It is generated by a hardware-derived signal

from an external source, as well as by the internal peripheral I/O. This type of event includes Reset Interrupt (RI),

System Break Interrupt (SBI) and External Interrupt (EI).

(3) Trap

This refers to a software interrupt generated by executing a TRAP instruction. This type of event is intentionally

generated in a program as in the OS’s system call by the programmer.

4.1  Outline of EIT

Figure 4.1.1  Classification of EITs

EIT

Exception (Exception)

Reserved Instruction Exception (RIE) 

Address Exception (AE)

Floating-Point Exception (FPE)

 Reset Interrupt (RI)

System Break Interrupt (SBI) 

External Interrupt (EI)

Trap (TRAP)

Interrupt (Interrupt)

Trap (Trap)

Содержание M32R/ECU Series








































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов