Renesas M30830T-RPD-E, Руководство пользователя

Страница: 56 / 74

( 56 / 74 )
Chapter 5. Specifications
5.1 Specifications
Table 5.1 lists the specifications of the M30830T-RPD-E.
Table 5.1 Specifications of the M30830T-RPD-E
*1 Converter board (separately available) is required.
*2 ROM area specified in the MCU file is valid.
PC4701 (excluding PC4700L and PC4701L)
M30833MJFP/M30833FJFP (100-pin 0.65-mm)
M30833MJGP/M30833FJGP*
1 (100-pin 0.5-mm)
M30835MJGP/M30835FJGP* 1 (144-pin 0.5-mm)
Planning to support M32C/81, M32C/82 Group MCUs
M30835FJGP (two pieces)
RAM: 31 KB
Single-chip mode
Memory expansion mode
Microprocessor mode
(1) 1 MB for internal ROM of MCU
Fixed F80000h - FFFFFFh* 2
(Possible to expand up to F00000h - FFFFFFh)
Maximum operating frequency: 20 MHz, 0 wait
(2) 1.5 MB (changeable) for expansion area
Possible to allocate by 256 KB or 1 MB
Maximum operating frequency: 20 MHz, 1 wait)
20 MHz (operating voltage: 3.0 to 3.6 V, 4.2 to 5.5 V, divide-by-1)
X
IN
-X
OUT
Internal oscillator circuit board (OSC-3)
Switchable to external oscillator input
X
CIN
-X
COUT
Internal oscillator circuit board (32.768 kHz fixed)
Switchable to external oscillator input
3.0 to 3.6 V, 4.2 to 5.5 V
5 to 35 ° C (no dew)
-10 to 60 ° C (no dew)
Supplied from PC4701
For 144-pin 0.5-mm-pitch LQFP (144P6Q-A):
M3T-FLX-144NSD (not included)
For 100-pin 0.5-mm-pitch LQFP (100P6Q-A):
(1) M30800T-PTC (included) + M3T-100LCC-QSD (not included)
(2) M30800T-PTC (included) + M3T-100LCC-DMS (not included)
+ M3T-FLX-100NSD (not included)
(3) M3T-F160-100NSD (not included)
For 100-pin 0.65-mm-pitch QFP (100P6S-A):
(1) M30800T-PTC (included) + M3T-100LCC-DMS (not included)
+ M3T-FLX-100NRB (not included)
(2) M30800T-PTC (included) + M3T-100LCC-DMS (not included)
+ M3T-DUMMY100S (not included)
(3) M30800T-PTC (included) + M3T-100LCC-DMS (not included)
+ M3T-DIRECT100S (not included)
For 100-pin LCC socket:
M30800T-PTC (included)
• U.S. EMI standards (FCC part 15 Class A)
• CE marking (EN55022, EN50082-1)
Emulator
Applicable MCUs
Evaluation MCU
Usable modes
Emulation memory
Maximum operating frequency
Clock supply
Operating frequency
Operating temperature
Storage temperature
Power supply to emulation pod
Connection to target system
(see 3.6 "Connecting the Target
System" on page 36)
Overseas standards