Renesas M30830T-RPD-E, Руководство пользователя

Страница: 28 / 74

( 28 / 74 )
Table 3.3 Switch settings of the M30830T-RPD-E (3/4)
Signal Switch Setting Description
IMPORTANT
Note on Switch Setting:
• Switch settings of RDY*/HOLD*, CNVss, BYTE and AV
CC
/AV
SS
are provided to
enable debugging without connecting to the target system. When using the emulator
debugger in connection with the target system, set SW4 and SW7 to the OPEN
positions and SW5 and SW6 to the center positions.
AV
CC
/AV
SS
SW7
Connects the V
CC
and V
SS
to pins AV
CC
and AV
SS
of the MCU, respectively.
Be sure to set this when using the emulation board
without the target system.
Connects pin AV
CC
/AV
SS
of the MCU to the target
system.
SW7
AVCC
OPEN
VCC
SW7
AVCC
OPEN
VCC
Factory-setting